Ipv6 Hoplimit-Expires Enable; Ipv6 Host - HP E4510-48G Command Reference Manual

ipv6 hoplimit-expires enable

Syntax
ipv6 hoplimit-expires enable
undo ipv6 hoplimit-expires
View
System view
Default Level
2: System level
Parameters
None
Description
Use the ipv6 hoplimit-expires enable command to enable the sending of ICMPv6 time exceeded
packets.
Use the undo ipv6 hoplimit-expires command to disable the sending of ICMPv6 time exceeded
packets.
By default, the sending of ICMPv6 time exceeded packets is enabled.
Note that:
After you disable the sending of ICMPv6 time exceeded packets, the device will not send time-to-live
count exceeded packets, but will still send fragment reassembly time exceeded packets.
Examples
# Disable the sending of ICMPv6 time exceeded packets.
<Sysname> system-view
[Sysname] undo ipv6 hoplimit-expires

ipv6 host

Syntax
ipv6 host hostname ipv6-address
undo ipv6 host hostname [ ipv6-address ]
View
System view
Default Level
2: System level
Parameters
hostname: Host name, a string of up to 20 characters. The character string can contain letters,
numerals, "_", "-", or "." and must contain at least one letter.
12-27