Qos Lr Outbound - HP E4510-48G Command Reference Manual

View
Any view
Default Level
1: Monitor level
Parameters
interface-type: Port type.
interface-number: Port number.
Description
Use the display qos lr interface command to display the line rate configuration information of the
specified port or all ports if no port is specified.
Examples
# Display the line rate configuration and statistics information of all the interfaces.
<Sysname> display qos lr interface
Interface: GigabitEthernet1/0/1
Direction: Inbound
CIR 6400 (kbps), CBS 400000 (byte)
Table 3-2 display qos lr command output description
Field
Interface
Direction
CIR
CBS

qos lr outbound

Syntax
qos lr outbound cir committed-information-rate [ cbs committed-burst-size ]
undo qos lr outbound
View
Ethernet interface view, port group view
Default Level
2: System Level
Parameters
outbound: Limits the rate of the outbound traffic.
cir committed-information-rate: Specifies the committed information rate (CIR) in kbps. The range of
CIR varies with port types as follows:
Port name, composed of port type and port number
Specify the direction of limited rate as inbound
Committed information rate, in kbps
Committed burst size, in byte
3-3
Description