Port Monitor-Link Group - HP E4510-48G Command Reference Manual

Default Level
2: System level
Parameters
interface-type interface-number: Port type and port number.
uplink: Specifies an uplink port.
downlink: Specifies a downlink port.
Description
Use the port command to assign a port to the monitor link group.
Use the undo port command to remove a port from the monitor link group.
Both Ethernet ports and Layer-2 aggregate interfaces can be assigned to a monitor link group.
A port can be assigned to only one monitor link group.
Alternatively, you can assign a port to a monitor link group with the port monitor-link group
command in Ethernet interface view or Layer-2 aggregate interface view.
Related commands: port monitor-link group.
Examples
# Configure member ports for monitor link group 1.
<Sysname> system-view
[Sysname] monitor-link group 1
[Sysname-mtlk-group1] port gigabitethernet 1/0/1 uplink
[Sysname-mtlk-group1] port gigabitethernet 1/0/2 downlink

port monitor-link group

Syntax
port monitor-link group group-id { uplink | downlink }
undo port monitor-link group group-id
View
Ethernet interface view, Layer-2 aggregate interface view
Default Level
2: System level
Parameters
group-id: Monitor link group ID, in the range 1 to 16.
uplink: Specifies an uplink port.
2-3