Info-Center Synchronous - HP E4510-48G Command Reference Manual

Output
Modules
destinati
allowed
on
default
Monitor
(all
terminal
modules)
default
Log host (all
modules)
default
Trap
(all
buffer
modules)
default
Log buffer (all
modules)
default
SNMP
(all
module
modules)
Examples
# Set the output channel for the log information of VLAN module to snmpagent and to output
information with severity being emergency. Log information of other modules cannot be output to this
channel; other types of information of this module may or may not be output to this channel.
<Sysname> system-view
[Sysname] info-center source default channel snmpagent log state off
[Sysname] info-center source vlan channel snmpagent log level emergencies state on
# Set the output channel for the log information of VLAN module to snmpagent and to output
information with severity being emergency. Log information of other modules and all the other system
information cannot be output to this channel.
<Sysname> system-view
[Sysname] info-center source default channel snmpagent debug state off log state off trap
state off
[Sysname] info-center source vlan channel snmpagent log level emergencies state on

info-center synchronous

Syntax
info-center synchronous
undo info-center synchronous
View
System view
Default Level
2: System level
LOG
Enabled/
Severity
disabled
Enabled Warning
Informatio
Enabled
nal
Informatio
Disabled
nal
Enabled Warning
Disabled Debug
16-17
TRAP
Enabled/
Severity
disabled
Enabled Debug
Enabled Debug
Enabled Warning
Disabled Debug
Enabled Warning
DEBUG
Enabled/
Severity
disabled
Enabled Debug
Disabled Debug
Disabled Debug
Disabled Debug
Disabled Debug