Display Ipc Multicast-Group - HP E4510-48G Command Reference Manual

1
2
The above prompt information indicates that:
A connection exists between the local node and node 1, and the connection is up;
A connection exists between the local node and node 2, and the connection is down.
Table 22-2 display ipc link command output description
Field
Dst-NodeID
LinkStatus

display ipc multicast-group

Syntax
display ipc multicast-group { node node-id | self-node }
View
Any view
Default Level
1: Monitor level
Parameters
node node-id: Displays the multicast group information of the specified node, where node-id
represents the number of the specified node, in the range of 0 to 9.
self-node: Displays the multicast group information of the local node.
Description
Use the display ipc multicast-group command to display the multicast group information of the
specified node.
Examples
# Display the multicast group information of node 6.
<Sysname> display ipc multicast-group node 6
GroupID Status
----------------------------------
8 INUSE
UP
DOWN
Number of the peer node
Link status, which may take the following values:
UP: A connection is established.
DOWN: A connection is terminated.
ChannelID
12
Description
22-3