Ip Source Guard Configuration Commands; Display Ip Check Source - HP E4510-48G Command Reference Manual

9

IP Source Guard Configuration Commands

IP Source Guard Configuration Commands

display ip check source

Syntax
display ip check source [ interface interface-type interface-number | ip-address ip-address |
mac-address mac-address ]
View
Any view
Default Level
1: Monitor level
Parameters
interface interface-type interface-number: Displays the dynamic bindings of the interface specified by
its type and number.
ip-address ip-address: Displays the dynamic bindings of an IP address.
mac-address mac-address: Displays the dynamic bindings of an MAC address (in the format of
H-H-H).
Description
Use the display ip check source command to display dynamic bindings.
With no options specified, the command displays the dynamic bindings of all interfaces.
Related commands: ip check source.
Examples
# Display all dynamic bindings.
<Sysname> display ip check source
Total entries found: 2
MAC
040a-0000-4000
040a-0000-2000
IP Vlan Port
10.1.0.9 2
10.1.0.7 2
9-1
Status
GigabitEthernet1/0/1 DHCP-SNP
GigabitEthernet1/0/1 DHCP-SNP