Authorization Login - HP E4510-48G Command Reference Manual

Parameters
local: Performs local authorization.
none: Does not perform any authorization. In this case, an authenticated user is automatically
authorized with the default rights.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
Description
Use the authorization lan-access command to configure the authorization method for LAN access
users.
Use the undo authorization lan-access command to restore the default.
By default, the default authorization method is used for LAN access users.
Note that:
The RADIUS scheme specified for the current ISP domain must have been configured.
RADIUS authorization is special in that it takes effect only when the RADIUS authorization
scheme is the same as the RADIUS authentication scheme. If the RADIUS authorization scheme
is different from the RADIUS authentication scheme, RADIUS authorization will fail.
Related commands: authorization default, radius scheme.
Examples
# Configure the default ISP domain system to use local authorization for LAN access users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system]authorization lan-access local
# Configure the default ISP domain system to use RADIUS authorization scheme rd for LAN access
users and use local authorization as the backup.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authorization lan-access radius-scheme rd local

authorization login

Syntax
authorization login { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none |
radius-scheme radius-scheme-name [ local ] }
undo authorization login
View
ISP domain view
Default Level
2: System level
1-12