Radius Scheme - HP E4510-48G Command Reference Manual

Examples
# Set the IP address for the device to use as the source address of the RADIUS packets to
129.10.10.1.
<Sysname> system-view
[Sysname] radius nas-ip 129.10.10.1

radius scheme

Syntax
radius scheme radius-scheme-name
undo radius scheme radius-scheme-name
View
System view
Default Level
3: Manage level
Parameters
radius-scheme-name: RADIUS scheme name, a case-insensitive string of 1 to 32 characters.
Description
Use the radius scheme command to create a RADIUS scheme and enter RADIUS scheme view.
Use the undo radius scheme command to delete a RADIUS scheme.
By default, no RADIUS scheme is defined.
Note that:
The RADIUS protocol is configured scheme by scheme. Every RADIUS scheme must at least
specify the IP addresses and UDP ports of the RADIUS authentication/authorization/accounting
servers and the parameters necessary for a RADIUS client to interact with the servers.
A RADIUS scheme can be referenced by more than one ISP domain at the same time.
You cannot remove the RADIUS scheme being used by online users with the undo radius
scheme command.
Related commands:
stop-accounting-buffer enable, retry stop-accounting, server-type, state, user-name-format,
retry, display radius scheme, display radius statistics.
Examples
# Create a RADIUS scheme named radius1 and enter RADIUS scheme view.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1]
key, retry realtime-accounting,
2-13
timer realtime-accounting,