Free User-Interface - HP E4510-48G Command Reference Manual

Switch 4510G only support none keyword.
Examples
# Configure software flow control on AUX port.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] flow-control none

free user-interface

Syntax
free user-interface [ type ] number
View
User view
Default Level
3: Manage level
Parameters
type: User interface type.
number: Absolute user interface index or relative user interface index.
Relative user interface index: If you provide the type argument, number indicates the user
interface index of the type. When the type is AUX, the number is 0; when the type is VTY, the
number ranges from 0 to 4.
Absolute user interface index: If you do not provide the type argument, number indicates absolute
user interface index, which ranges from 0 to 5.
Description
Use the free user-interface command to clear a specified user interface. If you execute this command,
the corresponding user interface will be disconnected.
Note that the current user interface can not be cleared.
Examples
# Log into user interface 0 and clear user interface 1.
<Sysname> free user-interface 1
Are you sure to free user-interface vty0
[Y/N]y
[OK]
After you execute this command, user interface 1 will be disconnected. The user in it must log in again
to connect to the switch.
1-12