Time-Range - HP E4510-48G Command Reference Manual

View
Any view
Default Level
1: Monitor level
Parameters
time-range-name: Time range name, a case insensitive string of 1 to 32 characters. It must start with
an English letter and cannot be the English word of all to avoid confusion.
all: Specifies all existing time ranges.
Description
Use the display time-range command to display the configuration and status of a specified time range
or all time ranges.
A time range is active if the system time falls into its range.
Examples
# Display the configuration and status of time range trname.
<Sysname> display time-range trname
Current time is 22:20:18 1/5/2006 Thursday
Time-range : trname ( Inactive )
from 15:00 1/28/2006 to 15:00 1/28/2008
Table 14-2 display time-range command output description
Field
Current time

Time-range

time-range
Syntax
time-range time-range-name { start-time to end-time days [ from time1 date1 ] [ to time2 date2 ] |
from time1 date1 [ to time2 date2 ] | to time2 date2 }
undo time-range time-range-name [ start-time to end-time days [ from time1 date1 ] [ to time2 date2 ]
| from time1 date1 [ to time2 date2 ] | to time2 date2 ]
View
System view
Default Level
2: System level
Current system time
Configuration and status of the time range, including the name of the
time range, its status (active or inactive), and its start time and end time.
14-3
Description