Qos Wfq - HP E4510-48G Command Reference Manual

Default Level
2: System Level
Parameters
None
Description
Use the qos sp command to configure SP queuing on the current port.
Use the undo qos sp command to restore the default queuing algorithm on the port.
By default, all the ports adopt the WRR queue scheduling algorithm, with the weight values assigned to
queue 0 through queue 7 being 1, 2, 3, 4, 5, 9, 13, and 15.
Related commands: display qos sp interface.
Examples
# Configure SP queuing on GigabitEthernet1/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos sp

qos wfq

Syntax
qos wfq
undo qos wfq
View
Ethernet interface view, port group view
Default Level
2: System Level
Parameters
None
Description
Use the qos wfq command to enable weighted fair queuing (WFQ) on a port or port group.
Use the undo qos wfq command to restore the default.
By default, all the ports adopt the WRR queue scheduling algorithm, with the weight values assigned to
queue 0 through queue 7 being 1, 2, 3, 4, 5, 9, 13, and 15.
Related commands: display qos wrr interface.
Examples
# Enable WFQ on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
4-5