HP E4510-48G Command Reference Manual page 1002

Default Level
2: System level
Parameters
sysname: Name of the device, a string of 1 to 30 characters.
Description
Use the sysname command to set the name of the device.
Use the undo sysname demand to restore the device name to the default.
The default name is "4510G" by default.
Modifying device name affects the prompt of the CLI. For example, if the device name is Sysname, the
prompt of user view is <Sysname>.
Examples
# Set the name of the device to Switch.
<Sysname> system-view
[Sysname] sysname Switch
[Switch]
system-view
Syntax
system-view
View
User view
Default Level
2: System level
Parameters
None
Description
Use the system-view command to enter system view from the current user view.
Related commands: quit, return.
Examples
# Enter system view from the current user view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname]
3-24