Mld-Snooping Router-Aging-Time; Mld-Snooping Source-Deny - HP E4510-48G Command Reference Manual

Examples
# Set the MLD query interval to 20 seconds in VLAN 2.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping query-interval 20

mld-snooping router-aging-time

Syntax
mld-snooping router-aging-time interval
undo mld-snooping router-aging-time
View
VLAN view
Default Level
2: System level
Parameters
interval: Dynamic router port aging time, in seconds. The effective range is 1 to 1,000.
Description
Use the mld-snooping router-aging-time command to configure the aging time of dynamic router
ports in the current VLAN.
Use the undo mld-snooping router-aging-time command to restore the default setting.
By default, the dynamic router port aging time is 260 seconds.
This command takes effect only if MLD Snooping is enabled in the VLAN.
Related commands: router-aging-time.
Examples
# Set the aging time of dynamic router ports to 100 seconds in VLAN 2.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping router-aging-time 100

mld-snooping source-deny

Syntax
mld-snooping source-deny
undo mld-snooping source-deny
View
Ethernet port view, port group view
3-18