HP E4510-48G Command Reference Manual page 1005

View
User view
Default Level
2: System level
Parameters
update file file-url: Upgrades Boot ROM, where file-url is a string of 1 to 63 characters and represents
name of the file to be upgraded. file-url is in the format of [drive:/][path/]file-name, where
The items in square brackets [ ] are optional.
drive specifies the storage medium of the file. The value is the name of the storage medium. For
the switch 4510G, the storage medium can only be a flash.
path specifies the folder of the file. If you do not provide this argument, the file must be in the root
directory of the specified storage medium. If the file is saved in a subfolder, you can use this
argument multi-times, for example, test/subtest/test.bin.
file-name specifies the filename.
If you do not provide arguments drive and path, the file with the name file-name under the current
path is specified. You can use the cd command to switch to another path. For details of the cd
command, refer to the File System Management Commands in the System Volume.
slot slot-number-list: Specifies a list of IDs of member devices, in the format of { slot-number [ to
slot-number ] }&<1-7>. The slot-number argument represents the ID of a member device. You can use
the display irf command to view the member IDs of stack members.
Description
Use the bootrom command to read, restore, back up, or upgrade the Boot ROM program on a
specified member device(s).
Note the following:
To execute the bootrom command successfully, you must save the Boot ROM program under the
root directory of the storage media on a member device.
If the storage medium is on the master, you can specify the storage medium by giving its name,
such as flash; If a storage medium is on a slave, you can specify the storage medium by giving its
name and the member ID of the device, that is, in the format of slotslot-number#
StorageMediumName (slot-number represents the member ID of the slave), such as slot2#flash.
When you upgrade the Boot ROM program for the master, the file-url argument cannot contain the
member ID of the device, and slot-number should be specified as the member ID of the master;
when you upgrade the Boot ROM program for a slave, the file-url argument must contain the
member ID (such as slot2#flash:/test.bin), slot-number should be specified as the member ID of
the slave.
Examples
# Use the a.btm file to upgrade the Boot ROM program on the master (the member ID is 1).
<Sysname> bootrom update file a.btm slot 1
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Succeeded to update bootrom of Board 1.
4-3