Display Acl Ipv6 - HP E4510-48G Command Reference Manual

4510g series
Table of Contents

Advertisement

Default Level
2: System level
Parameters
text: ACL description, a case-sensitive string of 1 to 127 characters.
Description
Use the description command to configure a description for an IPv6 ACL to, for example, describe the
purpose of the ACL.
Use the undo description command to remove the IPv6 ACL description.
By default, an IPv6 ACL has no ACL description.
Examples
# Configure a description for IPv6 ACL 2000.
<Sysname> system-view
[Sysname] acl ipv6 number 2000
[Sysname-acl6-basic-2000] description This acl is used in geth 1/0/1
# Configure a description for IPv6 ACL 3000.
<Sysname> system-view
[Sysname] acl ipv6 number 3000
[Sysname-acl6-adv-3000] description This acl is used in geth 1/0/1

display acl ipv6

Syntax
display acl ipv6 { acl6-number | all | name acl6-name }
View
Any view
Default Level
1: Monitor level
Parameters
acl6-number: IPv6 ACL number, which must be in the following ranges:
2000 to 2999 for basic IPv6 ACLs
3000 to 3999 for advanced IPv6 ACLs
all: Specifies all IPv6 ACLs.
name acl6-name: Specifies the name of the ACL, which is a case insensitive string of 1 to 32
characters. It must start with an English letter and cannot be the English word of all to avoid confusion.
Description
Use the display acl ipv6 command to display information about a specified IPv6 ACL or all IPv6 ACLs.
Note that this command displays ACL rules in the match order.
14-23

Advertisement

Table of Contents
loading

Table of Contents