Displaying Acl Data; Display An Acl Summary - HP ProCurve 5300xl Series Management Manual

Access Control Lists (ACLs) for the Series 5300xl Switches

Displaying ACL Data

9-48

Displaying ACL Data

ACL Commands
show access-list
show access-list config
show access-list vlan < vid > List the name and type of ACLs assigned to a particular
show access-list < acl-id >
show config
show running

Display an ACL Summary

This command lists the configured ACLs, regardless of whether they are
assigned to any VLANs.
Syntax: show access-list
List a summary table of the name, type, and application status
of all ACLs configured on the switch.
For example:
Figure 9-17. Example of a Summary Table of Access lists
Term Meaning
Type Shows whether the listed ACL is
(Extended; protocol, source, and destination data).
Appl Shows whether the listed ACL has been applied to a VLAN (
Name Shows the name or ID number assigned to each ACL configured in the switch.
Function
View a brief listing of all ACLs on the switch.
Display the CLI commands for generating the ACL
commands configured in the switch.
VLAN on the switch.
Display detailed content information for a specific ACL. 9-51
show config includes configured ACLs and
assignments existing in the startup-config file.
show running includes configured ACLs and
assignments existing in the running-config file.
In this switch, ACLs 105 and "Red
VLAN Inbound" exist in the
configuration but are not applied to any
VLANs and thus do not affect packet
std
(Standard; source-address only) or
Page
9-48
9-49
9-50
ext
yes/no
).