Display Tcp Ipv6 Status - HP E4510-48G Command Reference Manual

dropped
initiated dropped

display tcp ipv6 status

Syntax
display tcp ipv6 status
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display tcp ipv6 command to display the IPv6 TCP connection status, including IP address of
the IPv6 TCP control block, local and peer IPv6 addresses, and status of the IPv6 TCP connection.
Examples
# Display the IPv6 TCP connection status.
<Sysname> display tcp ipv6 status
TCP6CB Local Address
045d8074 ::->21
Table 12-12 display tcp ipv6 status command output description
Field
TCP6CB
Local Address
Foreign Address
Field
Foreign Address
::->0
IPv6 address of the TCP control block (hexadecimal)
Local IPv6 address
Remote IPv6 address
12-20
Description
Number of dropped connections (after SYN is
received from the peer)
Number of initiated but dropped connections
(before SYN is received from the peer)
State
Listening
Description