Authorization Command - HP E4510-48G Command Reference Manual

Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, which is
a string of 1 to 32 characters.
local: Performs local authentication.
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
Description
Use the authentication login command to configure the authentication method for login users.
Use the undo authentication login command to restore the default.
By default, the default authentication method is used for login users.
Note that the RADIUS or HWTACACS scheme specified for the current ISP domain must have been
configured.
Related commands: authentication default, hwtacacs scheme, radius scheme.
Examples
# Configure the default ISP domain system to use local authentication for login users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authentication login local
# Configure the default ISP domain system to use RADIUS authentication scheme rd for login users
and use local authentication as the backup.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authentication login radius-scheme rd local

authorization command

Syntax
authorization command { hwtacacs-scheme hwtacacs-scheme-name [ local | none ] | local |
none }
undo authorization command
View
ISP domain view
Default Level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, which is
a string of 1 to 32 characters.
local: Performs local authorization.
1-9