Startup Saved-Configuration - HP E4510-48G Command Reference Manual

startup saved-configuration

Syntax
startup saved-configuration cfgfile [ backup | main ]
undo startup saved-configuration
View
User view
Default Level
2: System level
Parameters
cfgfile: Configuration file name. The file must be a file with an extension .cfg stored in the root directory
of the storage medium.
backup: Sets the configuration file as the backup startup configuration file that will be used at the next
startup of the device.
main: Sets the configuration file as the main startup configuration file that will be used at the next
startup of the device.
Description
Use the startup saved-configuration command to specify a startup configuration file (the
configuration file to be used at the next system startup) for all the member devices.
Use the undo startup saved-configuration command to configure all the member devices to start up
with the null configuration, that is, the factory configuration.
The startup configuration file for the next startup of all the member devices must the same. Therefore,
before using the command, ensure that the specified configuration file has been saved to the root
directories of the storage media of all the member devices; otherwise, the command will fail.
The startup saved-configuration and startup saved-configuration main commands have the
same effect: Both of them are used to specify the main startup configuration file.
The main and backup startup configuration files can be specified as the same file. However, it is
recommended you use different files, or, save the same configuration as two files using different
file names, one specified as the main startup configuration file, and the other specified as the
backup.
If you execute the undo startup saved-configuration command, the system will set the main
and backup startup configuration file as NULL, but will not delete the two configuration files.
Related commands: display startup.
Examples
# Specify a startup configuration file for the next system startup.
<Sysname> startup saved-configuration testcfg.cfg
Please wait ...
Setting the master board ..........
... Done!
Setting the slave board ...
5-29