HP E4510-48G Command Reference Manual page 694

Reauth Period
The maximal retransmitting times
EAD quick deploy configuration:
URL: http://192.168.19.23
Free IP: 192.168.19.0 255.255.255.0
EAD timeout:
The maximum 802.1X user resource number is 1024 per slot
Total current used 802.1X resource number is 1
GigabitEthernet1/0/1 is link-up
802.1X protocol is enabled
Handshake is disabled
Handshake secure is disabled
Periodic reauthentication is disabled
The port is an authenticator
Authenticate Mode is Auto
802.1X Multicast-trigger is enabled
Mandatory authentication domain: NOT configured
Port Control Type is Mac-based
Guest VLAN: 4
Max number of on-line users is 256
EAPOL Packet: Tx 1087, Rx 986
Sent EAP Request/Identity Packets : 943
EAP Request/Challenge Packets: 60
EAP Success Packets: 29, Fail Packets: 55
Received EAPOL Start Packets : 60
EAPOL LogOff Packets: 24
EAP Response/Identity Packets : 724
EAP Response/Challenge Packets: 54
Error Packets: 0
1. Authenticated user : MAC address: 0015-e9a6-7cfe
Controlled User(s) amount to 1
Table 4-1 display dot1x command output description
Field
Equipment 802.1X protocol is enabled
CHAP authentication is enabled
EAD quick deploy is enabled
Transmit Period
Handshake Period
Reauth Period
3600 s
30m
Indicates whether 802.1X is enabled globally
Indicates whether CHAP authentication is
enabled
Indicates whether EAD quick deployment is
enabled
Setting of the username request timeout timer
Setting of the handshake timer
Setting of the periodic re-authentication timer
4-2
3
Description