If-Match Acl - HP E4510-48G Command Reference Manual

View
Any view
Default Level
1: Monitor level
Parameters
ip-prefix-name: IP prefix list name, a string of 1 to 19 characters.
Description
Use the display ip ip-prefix command to display the statistics of an IPv4 prefix list. If no
ip-prefix-name is specified, statistics for all IPv4 prefix lists will be displayed.
Related commands: ip ip-prefix.
Examples
# Display the statistics of IPv4 prefix list abc.
<Sysname> display ip ip-prefix abc
Prefix-list abc
Permitted 0
Denied 0
index: 10
Table 6-2 display ip ip-prefix command output description.
Field
Prefix-list
Permitted
Denied
index
permit
1.0.0.0/11
ge
le

if-match acl

Syntax
if-match acl acl-number
undo if-match acl
View
Route policy view
permit 1.0.0.0/11
Name of the IPv4 prefix list
Number of routes satisfying the match criterion
Number of routes not satisfying the match criterion
Index of the IPv4 prefix list
Matching mode: permit or deny
IP address and mask
greater-equal, the lower limit
less-equal, the higher limit
6-8
ge 22 le 32
Description