Display Ipv6 Routing-Table Acl - HP E4510-48G Command Reference Manual

Parameters
None
Description
Use the display ipv6 routing-table command to display brief routing table information, including
destination IP address and prefix, protocol type, priority, metric, next hop and outbound interface.
The command displays only active routes, namely, the brief information about the current optimal
routes.
Examples
# Display brief routing table information
<Sysname> display ipv6 routing-table
Routing Table :
Destinations : 1
Destination : ::1/128
NextHop : ::1
Interface : InLoop0
Table 1-4 display ipv6 routing-table command output description
Field
Destination
NextHop
Preference
Interface
Protocol
Cost

display ipv6 routing-table acl

Syntax
display ipv6 routing-table acl acl6-number [ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
acl6-number: Basic IPv6 ACL number, in the range 2000 to 2999.
verbose: Displays both active and inactive verbose routing information permitted by the ACL. Without
this keyword, only brief active routing information is displayed.
Routes : 1
Protocol
Preference
Cost
IPv6 address of the destination network/host
Nexthop address
Route priority
Outbound interface
Routing protocol
Route cost
1-13
: Direct
: 0
: 0
Description