Display Stop-Accounting-Buffer - HP E4510-48G Command Reference Manual

Discarded No-response-acct-stop
packet for buffer overflow

display stop-accounting-buffer

Syntax
display stop-accounting-buffer { radius-scheme radius-scheme-name | session-id session-id |
time-range start-time stop-time | user-name user-name } [ slot slot-number ]
View
Any view
Default Level
2: System level
Parameters
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
session-id session-id: Specifies a session by its ID. The ID is a string of 1 to 50 characters.
time-range start-time stop-time: Specifies a time range by its start time and end time in the format of
hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd.
user-name user-name: Specifies a user by the user name, which is a case-sensitive string of 1 to 80
characters. Whether the user-name argument should include the domain name depends on the setting
by the user-name-format command for the RADIUS scheme.
slot slot-number: Specifies the specified member device in an IRF. The slot-number argument
indicates the member device ID.
Description
Use the display stop-accounting-buffer command to display information about the stop-accounting
requests buffered in the device by scheme, session ID, time range, user name, or slot.
Note that if receiving no response after sending a stop-accounting request to a RADIUS server, the
device buffers the request and retransmits it. You can use the retry stop-accounting command to set
the number of allowed transmission attempts.
Related commands:
user-name-format, retry stop-accounting.
Examples
# Display information about the buffered stop-accounting requests from 0:0:0 to 23:59:59 on August 31,
2006.
<Sysname> display stop-accounting-buffer time-range 0:0:0-08/31/2006 23:59:59-08/31/2006
Total 0 record(s) Matched
Field
reset stop-accounting-buffer,
Number of stop-accounting packets that were buffered but
then discarded due to full memory
2-7
Description
stop-accounting-buffer enable,