Display Cfd Remote-Mep - HP E4510-48G Command Reference Manual

MEP ID: 104
Maintenance domain: mdtest4
Maintenance association: mainmd4
MEP ID: 102
Maintenance domain: mdtest2
Maintenance association: mainmd2
Interface GigabitEthernet1/0/4
MEP ID: 9
Maintenance domain: mdtest6
Maintenance association: matest6
Table 6-10 display cfd mp command output description
Interface GigabitEthernet1/0/1
MEP ID
MIP
Level
Service instance
Direction
Maintenance domain
Maintenance association

display cfd remote-mep

Syntax
display cfd remote-mep service-instance instance-id mep mep-id
View
Any view
Default level
2: System level
Parameters
service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767.
mep mep-id: Specifies the ID of a MEP, ranging from 1 to 8191.
Description
Use the display cfd remote-mep command to display the information of the remote MEP.
Level: 4 Service instance: 104
Level: 2 Service instance: 102
VLAN 1
Level: 6 Service instance: 6
Field
VLAN 100
Direction: Inbound
Direction: Inbound
Direction: Outbound
MP configuration of the specified VLAN on the
specified port
ID of the MEP
A MIP in the MP
MD level that an MP belongs to
Service instance to which the MP belongs
Direction of the MP
MD to which an MP belongs
MA to which an MP belongs
6-20
Description