Ndp Enable - HP E4510-48G Command Reference Manual

Status
Pkts Snd
Pkts Rvd
Pkts Err
Neighbor 1: Aging Time
MAC Address
Host Name
Port Name
Software Ver
Device Name
Port Duplex
Product Ver
BootROM Ver

ndp enable

Syntax
In Ethernet interface view or Layer 2 aggregate interface view:
ndp enable
undo ndp enable
In system view:
ndp enable [ interface interface-list ]
undo ndp enable [ interface interface-list ]
View
System view, Ethernet interface view, Layer 2 aggregate interface view
Default Level
2: System level
Parameters
interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The
interface-list argument is in the format of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } & <1-10>, where interface-type represents the port type,
interface-number represents the port number, and & <1-10> means that you can provide up to 10 port
indexes/port index lists for this argument.
Description
Use the ndp enable command to enable NDP.
Field
20-4
Description
NDP state of a port
Number of the NDP packets sent through the
port
Number of the NDP packets received on the port
Number of the error NDP packets received
Aging time of the NDP information of a neighbor
device
MAC address of a neighbor device
Host name of a neighbor device
Port name of a neighbor device
Software version of the neighbor device
Device name of a neighbor device
Port duplex mode of a neighbor device
Product version of a neighbor device
Boot ROM version of a neighbor device