Habp Server Vlan; Habp Timer - HP E4510-48G Command Reference Manual

habp server vlan

Syntax
habp server vlan vlan-id
undo habp server
View
System view
Default Level
2: System level
Parameters
vlan-id: ID of the VLAN in which HABP packets are to be transmitted, in the range 1 to 4094.
Description
Use the habp server vlan command to configure HABP to work in server mode and specify the VLAN
in which HABP packets are to be transmitted.
Use the undo habp server vlan command to configure HABP to work in the default mode.
By default, HABP works in client mode.
Examples
# Configure HABP to work in server mode and specify the VLAN for HABP packets as VLAN 2.
<Sysname> system-view
[Sysname] habp server vlan 2

habp timer

Syntax
habp timer interval
undo habp timer
View
System view
Default Level
2: System level
Parameters
interval: Interval (in seconds) to send HABP request packets, in the range 5 to 600.
Description
Use the habp timer command to set the interval to send HABP request packets.
Use the undo habp timer command to restore the default.
The default interval is 20 seconds.
6-4