Display Ipc Queue - HP E4510-48G Command Reference Manual

Field
5Min
Total-Data

display ipc queue

Syntax
display ipc queue { node node-id | self-node }
View
Any view
Default Level
1: Monitor level
Parameters
node node-id: Displays the sending queue information of the specified node, where node-id
represents the number of the specified node, in the range of 0 to 9.
self-node: Displays the sending queue information of the local node.
Description
Use the display ipc queue command to display the sending queue information of the specified node.
Examples
# Display the sending queue information of the local node.
<Sysname> display ipc queue self-node
QueueType QueueID Dst-NodeID
------------------------------------------------------------
UNICAST 0
UNICAST 1
UNICAST 2
UNICAST 3
UNICAST 0
UNICAST 1
UNICAST 2
UNICAST 3
MULTICAST 0
MULTICAST 1
MULTICAST 2
MULTICAST 3
MULTICAST 4
MULTICAST 5
MIXCAST 0
MIXCAST 1
Average rate in the past 5 minutes, in pps
Total amount of data collected from the time when IPC performance
statistics was enabled to the time when this command is executed
Length FullTimes
0 4096
0 4096
0 4096
0 4096
1 4096
1 4096
1 4096
1 4096
-- 4096
-- 4096
-- 512
-- 512
-- 512
-- 512
-- 2048
-- 2048
Description
Packet
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
22-7