Mld-Snooping Max-Response-Time; Mld-Snooping Overflow-Replace - HP E4510-48G Command Reference Manual

Examples
# Set the MLD last-listener query interval to 3 seconds in VLAN 2.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping last-listener-query-interval 3

mld-snooping max-response-time

Syntax
mld-snooping max-response-time interval
undo mld-snooping max-response-time
View
VLAN view
Default Level
2: System level
Parameters
interval: Maximum response time for MLD general queries, in units of seconds. The effective range is 1
to 25.
Description
Use the mld-snooping max-response-time command to configure the maximum response time for
MLD general queries in the VLAN.
Use the undo mld-snooping max-response-time command to restore the default setting.
By default, the maximum response time for MLD general queries is 10 seconds.
This command takes effect only if MLD Snooping is enabled in the VLAN.
Related commands: max-response-time, mld-snooping query-interval.
Examples
# Set the maximum response time for MLD general queries to 5 seconds in VLAN 2.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping max-response-time 5

mld-snooping overflow-replace

Syntax
mld-snooping overflow-replace [ vlan vlan-list ]
undo mld-snooping overflow-replace [ vlan vlan-list ]
View
Ethernet port view, Layer 2 aggregate port view, port group view
3-15