Ipv6 Nd Autoconfig Managed-Address-Flag - HP E4510-48G Command Reference Manual

undo ipv6 icmpv6 multicast-echo-reply
View
System view
Default Level
2: System level
Parameters
None
Description
Use the ipv6 icmpv6 multicast-echo-reply enable command to enable the sending of multicast echo
replies.
Use the undo ipv6 icmpv6 multicast-echo-reply command to disable the sending of multicast echo
replies.
By default, the device is disabled from sending multicast echo replies.
Examples
# Enable the sending of multicast echo replies.
<Sysname> system-view
[Sysname] ipv6 icmpv6 multicast-echo-reply enable

ipv6 nd autoconfig managed-address-flag

Syntax
ipv6 nd autoconfig managed-address-flag
undo ipv6 nd autoconfig managed-address-flag
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the ipv6 nd autoconfig managed-address-flag command to set the managed address
configuration (M) flag to 1 so that the host can acquire an IPv6 address through stateful
autoconfiguration (for example, from a DHCP server).
Use the undo ipv6 nd autoconfig managed-address-flag command to restore the default.
By default, the M flag is set to 0 so that the host can acquire an IPv6 address through stateless
autoconfiguration.
12-29