Display Ip Ipv6-Prefix - HP E4510-48G Command Reference Manual

Examples
# Configure node 10 of route policy policy1 to set next hop 3ff3:506::1 for IPv6 routing information
matching exsting ACL 2000.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match acl 2000
[Sysname-route-policy] apply ipv6 next-hop 3ffe:506::1

display ip ipv6-prefix

Syntax
display ip ipv6-prefix [ ipv6-prefix-name ]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-prefix-name: IPv6 prefix list name, a string of 1 to 19 characters.
Description
Use the display ip ipv6-prefix command to display the statistics of the specified IPv6 prefix list. If no
IPv6 prefix list is specified, the statistics of all IPv6 prefix lists will be displayed.
Examples
# Display the statistics of all IPv6 prefix lists.
<Sysname> display ip ipv6-prefix
Prefix-list6 abc
Permitted 0
Denied 0
index:
index:
Table 6-3 display ip ipv6-prefix command output description
Field
Prefix-list6
Permitted
Denied
Index
Permit
::/1
10 permit ::/0
20 permit ::/1
Name of the IPv6 prefix list
Number of routes satisfying the match criterion
Number of routes not satisfying the match criterion
Index number of the prefix list
Matching mode of the item: permit, or deny
IPv6 address and prefix length for matching
ge 1
Description
6-13
le 128