Udp Helper Configuration Commands; Display Udp-Helper Server; Reset Udp-Helper Packet - HP E4510-48G Command Reference Manual

11

UDP Helper Configuration Commands

UDP Helper Configuration Commands

display udp-helper server

Syntax
display udp-helper server [ interface interface-type interface-number ]
View
Any view
Default Level
2: System level
Parameters
interface interface-type interface-number: Displays information of forwarded UDP packets on the
specified interface.
Description
Use the display udp-helper server command to display the information of forwarded UDP packets on
the specified interface or all interfaces.
If interface-type interface-number is not specified, this command displays the information of forwarded
UDP packets on all interfaces.
Examples
# Display the information of forwarded UDP packets on the interface VLAN-interface 1.
<Sysname> display udp-helper server interface vlan-interface 1
Interface name
Vlan-interface1
The information above shows that the IP address of the destination server corresponding to the
interface VLAN-interface 1 is 192.1.1.2, and that no packets are forwarded to the destination server.

reset udp-helper packet

Syntax
reset udp-helper packet
View
User view
Server address
192.1.1.2
Packets sent
0
11-1