Display Fib Ip-Address - HP E4510-48G Command Reference Manual

Table 10-1 display fib command output description
Destination count
FIB entry count
Destination/Mask
Nexthop
Flag
OutInterface
InnerLabel
Token

display fib ip-address

Syntax
display fib ip-address [ mask | mask-length ]
View
Any view
Default Level
1: Monitor level
Parameters
ip-address: Destination IP address, in dotted decimal notation.
mask: IP address mask.
mask-length: Length of IP address mask.
Description
Use the display fib ip-address command to display FIB entries that match the specified destination IP
address.
If no mask or mask length is specified, the FIB entry that matches the destination IP address and has
the longest mask will be displayed; if the mask is specified, the FIB entry that exactly matches the
specified destination IP address will be displayed.
Examples
# Display the FIB entries that match the destination IP address of 10.2.1.1.
Field Description
Total number of destination addresses
Total number of FIB entries
Destination address/length of mask
Address of next hop
Flags of routes:
"U"—Usable route
"G"—Gateway route
"H"—Host route
"B"—Blackhole route
"D"—Dynamic route
"S"—Static route
"R"—Relay route
Outbound interface
Inner label
LSP index number
10-3