HP E4510-48G Command Reference Manual page 1075

.226 Transfer complete.
FTP: 3304 byte(s) received in 4.889 second(s), 675.00 byte(s)/sec.
[ftp]
Table 6-3 debugging command output description
---> PORT
The parsed reply is
---> RETR
FTPC: File transfer started with the signal light
turned on.
FTPC: File transfer completed with the signal
light turned off.
delete
Syntax
delete remotefile
View
FTP client view
Default Level
3: Manage level
Parameters
remotefile: File name.
Description
Use the delete command to permanently delete a specified file on the remote FTP server.
To do this, you must be a user with the delete permission on the FTP server.
Examples
# Delete file temp.c.
[ftp] delete temp.c
250 DELE command successful.
dir
Syntax
dir [ remotefile [ localfile ] ]
Field
6-11
Description
Give an FTP order, with data port numbers
being...
The received reply code, which is defined in
RFC 959.
Download the file
File transfer starts, and the signal light is turned
on.
File transfer is completed, and the signal light is
turned off.