Description (Any Nqa Test Type View) - HP E4510-48G Command Reference Manual

Table 18-1 Default values of the size of test packets sent
Test Type
ICMP
UDP echo
UDP jitter
Voice
Voice
Voice
For an ICMP echo test, the size of a probe packet is the length of the data field in an ICMP echo
message.
For a UDP echo test, UDP jitter test and voice test, the size of a probe packet is the length of the
data field in a UDP packet.
Examples
# Configure the size of an ICMP echo probe packet as 80 bytes.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] data-size 80

description (any NQA test type view)

Syntax
description text
undo description
View
Any NQA test type view
Default Level
2: System level
Parameters
text: Descriptive string of a test group, in the range 1 to 200. It is case sensitive.
Description
Use the description command to give a brief description of a test group, usually, the test type or test
purpose of a test group.
Use the undo description command to remove the configured description information.
By default, no descriptive string is available for a test group.
Examples
# Configure the descriptive string for a test group as icmp-probe.
Codec type
None
None
None
G.711 A-law
G.711 µ-law
G.729 A-law
18-4
Default value (in bytes)
100
100
100
172
172
32