Display Ipv6 Host - HP E4510-48G Command Reference Manual

Flag
Label
Tunnel ID
TimeStamp
Interface

display ipv6 host

Syntax
display ipv6 host
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ipv6 host command to display the mappings between host names and IPv6
addresses in the static domain name resolution table.
Related commands: ipv6 host.
Examples
# Display the mappings between host names and IPv6 addresses in the static domain name resolution
table.
<Sysname> display ipv6 host
Host
aaa
bbb
Table 12-4 display ipv6 host command output description
Field
Host
Age
Field
Route flag:
Label
ID of a tunnel
Generation time of a FIB entry
Outgoing interface
Age Flags
0 static
0 static
Host name
Time for the entry to live. "0" is displayed in the case of static configuration.
Description
U — Usable route
G — Gateway route
H — Host route
B — Black hole route
D — Dynamic route
S — Static route
IPv6Address
2002::1
2002::2
Description
12-4