Rule (Access Control Policy View); State - HP E4510-48G Command Reference Manual

[Sysname-pki-domain-1]
D1526110AAD7527FB093ED7FC037B0B3CDDDAD93

rule (access control policy view)

Syntax
rule [ id ] { deny | permit } group-name
undo rule { id | all }
View
Access control policy view
Default Level
2: System level
Parameters
id: Number of the certificate attribute access control rule, in the range 1 to 16. The default is the
smallest unused number in this range.
deny: Indicates that a certificate whose attributes match an attribute rule in the specified attribute
group is considered invalid and denied.
permit: Indicates that a certificate whose attributes match an attribute rule in the specified attribute
group is considered valid and permitted.
group-name: Name of the certificate attribute group to be associated with the rule, a case-insensitive
string of 1 to 16 characters. It cannot be "a", "al" or "all".
all: Specifies all access control rules.
Description
Use the rule command to create a certificate attribute access control rule.
Use the undo rule command to delete a specified or all access control rules.
By default, no access control rule exists.
Note that a certificate attribute group must exist to be associated with a rule.
Examples
# Create an access control rule, specifying that a certificate is considered valid when it matches an
attribute rule in certificate attribute group mygroup.
<Sysname> system-view
[Sysname] pki certificate access-control-policy mypolicy
[Sysname-pki-cert-acp-mypolicy] rule 1 permit mygroup

state

Syntax
state state-name
undo state
root-certificate
11-25
fingerprint sha1