Terminal Logging - HP E4510-48G Command Reference Manual

Description
Use the terminal debugging command to enable the display of debugging information on the current
terminal.
Use the undo terminal debugging command to disable the display of debugging information on the
current terminal.
By default, the display of debugging information on the current terminal is disabled.
Note that:
The debugging information is displayed (using the terminal debugging command) only after the
monitoring of system information is enabled on the current terminal first (using the terminal
monitor command).
The configuration of this command is valid for only the current connection between the terminal
and the device. If a new connection is established, the display of debugging information on the
terminal restores the default.
Examples
# Enable the display of debugging information on the current terminal.
<Sysname> terminal debugging
% Current terminal debugging is on

terminal logging

Syntax
terminal logging
undo terminal logging
View
User view
Default Level
1: Monitor level
Parameters
None
Description
Use the terminal logging command to enable the display of log information on the current terminal.
Use the undo terminal logging command to disable the display of log information on the current
terminal.
By default, the display of log information on the current terminal is disabled.
Note that:
The log information is displayed (using the terminal logging command) only after the monitoring
of system information is enabled on the current terminal first (using the terminal monitor
command).
16-23