Ipv6 Nd Ns Retrans-Timer; Ipv6 Nd Nud Reachable-Time - HP E4510-48G Command Reference Manual

ipv6 nd ns retrans-timer

Syntax
ipv6 nd ns retrans-timer value
undo ipv6 nd ns retrans-timer
View
Interface view
Default Level
2: System level
Parameters
value: Interval for retransmitting an NS message in milliseconds, in the range of 1,000 to
4,294,967,295.
Description
Use the ipv6 nd ns retrans-timer command to set the interval for retransmitting an NS message. The
local interface retransmits an NS message at intervals of this value. Furthermore, the Retrans Timer
field in RA messages sent by the local interface is equal to this value.
Use the undo ipv6 nd ns retrans-timer command to restore the default.
By default, the local interface retransmits an NS message at intervals of 1,000 milliseconds and the
Retrans Timer field in RA messages sent by the local interface is 0.
Related commands: display ipv6 interface.
Examples
# Specify VLAN-interface 100 to retransmit NS messages at intervals of 10,000 milliseconds.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd ns retrans-timer 10000

ipv6 nd nud reachable-time

Syntax
ipv6 nd nud reachable-time value
undo ipv6 nd nud reachable-time
View
Interface view
Default Level
2: System level
Parameters
value: Neighbor reachable time in milliseconds, in the range of 1 to 3,600,000.
12-32