Reset Acl Ipv6 Counter - HP E4510-48G Command Reference Manual

Examples
# Display information about IPv6 ACL 2001.
<Sysname> display acl ipv6 2001
Basic IPv6 ACL 2001, named flow, 1 rule,
ACL's step is 5
rule 0 permit source 1::2/128 (5 times matched)
rule 0 comment This rule is used in geth 1/0/1
Table 14-8 display acl ipv6 command output description
Basic IPv6 ACL 2001
named flow
1 rule
ACL's step is 5
5 times matched
rule 0 comment This rule is used in geth 1/0/1

reset acl ipv6 counter

Syntax
reset acl ipv6 counter { acl6-number | all | name acl6-name }
View
User view
Default Level
2: System level
Parameters
acl6-number: IPv6 ACL number, which must be in the following ranges:
2000 to 2999 for basic IPv6 ACLs,
3000 to 3999 for advanced IPv6 ACLs.
all: Specifies all basic and advanced IPv6 ACLs.
name acl6-name: Specifies the name of the ACL, which is a case insensitive string of 1 to 32
characters. It must start with an English letter and cannot be the English word of all to avoid confusion.
Field
14-24
Description
The displayed information is about basic IPv6
ACL 2001.
The name of the ACL is flow.
The ACL contains one rule.
The rules in this ACL are numbered in steps of
5.
There have been five matches for the rule. Only
ACL matches performed by software are
counted.
This field is not displayed when no match is
found.
The description of ACL rule 0 is "This rule is
used in geth 1/0/1."