Portal Configuration Commands; Display Portal Acl - HP 5120 SI series Command Reference Manual

Portal configuration commands

display portal acl

Syntax
display portal acl { all | dynamic | static } interface interface-type interface-number [ | { begin | exclude
| include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Displays all portal access control lists (ACLs), including dynamic and static portal ACLs.
dynamic: Displays dynamic portal ACLs—ACLs generated dynamically after a user passes portal
authentication.
static: Displays static portal ACLs—ACLs generated through portal related configuration, such as
portal-free rule configuration.
interface interface-type interface-number: Displays the ACLs on the specified interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display portal acl command to display the ACLs on a specific interface.
Examples
# Display all ACLs on interface VLAN-interface 2.
<Sysname> display portal acl all interface vlan-interface 2
IPv4 portal ACL rules on Vlan-interface2:
Rule 0
Inbound interface : all
Type
Action
Source:
IP
Mask
MAC
Interface : any
: static
: permit
: 0.0.0.0
: 0.0.0.0
: 0000-0000-0000
126