Igmp-Snooping Version; Last-Member-Query-Interval (Igmp-Snooping View) - HP E4510-48G Command Reference Manual

igmp-snooping version

Syntax
igmp-snooping version version-number
undo igmp-snooping version
View
VLAN view
Default Level
2: System level
Parameters
version-number: IGMP snooping version, in the range of 2 to 3.
Description
Use the igmp-snooping version command to configure the IGMP Snooping version.
Use the undo igmp-snooping version command to restore the default setting.
By default, the IGMP Snooping version is 2.
Note that:
This command can take effect only if IGMP Snooping is enabled in the VLAN.
This command does not take effect in a sub-VLAN of a multicast VLAN.
Related commands: igmp-snooping enable; subvlan in Multicast VLAN Commands in the IP
Multicast Volume.
Examples
# Enable IGMP Snooping in VLAN 2, and set the IGMP Snooping version to version 3.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping version 3

last-member-query-interval (IGMP-Snooping view)

Syntax
last-member-query-interval interval
undo last-member-query-interval
View
IGMP-Snooping view
Default Level
2: System level
1-21