HP E4510-48G Command Reference Manual page 411

Use the display ip routing-table verbose command to display detailed information about all routes in
the routing table.
This command displays detailed information about all active and inactive routes, including the statistics
of the entire routing table and information for each route.
Examples
# Display brief information about active routes in the routing table.
<Sysname> display ip routing-table
Routing Tables: Public
Destinations : 4
Destination/Mask
127.0.0.0/8
127.0.0.1/32
192.168.80.0/24
192.168.80.10/32
Table 1-1 display ip routing-table command output description
Field
Destinations
Routes
Destination/Mask
Proto
Pre
Cost
Nexthop
Interface
# Display detailed information about all routes in the routing table.
<Sysname> display ip routing-table verbose
Routing Table : Public
Destinations : 4
Destination: 10.1.1.0/24
Protocol: Direct
Preference: 0
NextHop: 10.1.1.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active Adv
Tag: 0
Destination: 10.1.1.1/32
Protocol: Direct
Preference: 0
NextHop: 127.0.0.1
Routes : 4
Proto Pre Cost
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Number of destination addresses
Number of routes
Destination address/mask length
Protocol that presents the route
Priority of the route
Cost of the route
Address of the next hop on the route
Outbound interface for packets to be forwarded along the route
Routes : 4
Process ID: 0
Cost: 0
Interface: Vlan-interface1
Neighbour: 0.0.0.0
Label: NULL
Age: 04h00m30s
Process ID: 0
Cost: 0
Interface: InLoopBack0
NextHop Interface
127.0.0.1 InLoop0
127.0.0.1 InLoop0
192.168.80.10 Vlan1
127.0.0.1 InLoop0
Description
1-2