[Sysname] smart-link group 1
[Sysname-smlk-group1] protected-vlan reference-instance 1 to 10 12
reset smart-link statistics
Syntax
reset smart-link statistics
View
User view
Default Level
2: System level
Parameters
None
Description
Use the reset smart-link statistics command to clear the statistics about flush messages.
Examples
# Clear the statistics about flush messages.
<Sysname> reset smart-link statistics
smart-link flush enable
Syntax
smart-link flush enable [ control-vlan vlan-id-list ]
undo smart-link flush enable [ control-vlan vlan-id-list ]
View
Ethernet interface view, Layer-2 aggregate interface view
Default Level
2: System level
Parameters
control-vlan vlan-id-list: Specifies the control VLANs used for receiving flush messages. The
vlan-id-list is expressed in the form of vlan-id-list = { vlan-id [ to vlan-id ] }&<1-10>, where the vlan-id
argument ranges from 1 to 4094 and &<1-10> indicates that you can provide up to ten VLAN IDs or
VLAN ID lists.
Description
Use the smart-link flush enable command to configure a VLAN for receiving flush messages, that is,
a receive control VLAN, on a port in Ethernet interface view or on all ports in system view.
Use the undo smart-link flush enable command to disable flush message processing.
By default, flush messages are not processed.
1-8