HP E4510-48G Command Reference Manual page 890

Interface GigabitEthernet1/0/51
DLDP port state : advertisement
DLDP link state : up
The neighbor number of the port is 1.
Neighbor mac address : 0000-0000-1100
Neighbor port index : 81
Neighbor state : two way
Neighbor aged time : 12
# Display the DLDP configuration of GigabitEthernet 1/0/50.
<Sysname> display dldp gigabitethernet 1/0/50
Interface GigabitEthernet1/0/50
DLDP port state : advertisement
DLDP link state : up
The neighbor number of the port is 1.
Neighbor mac address : 0000-0000-0100
Neighbor port index : 79
Neighbor state : two way
Neighbor aged time : 13
Table 4-1 display dldp command output description
Field
DLDP global status
DLDP interval
DLDP work-mode
DLDP authentication-mode
password
DLDP unidirectional-shutdown
DLDP delaydown-timer
The number of enabled ports
Interface
DLDP port state
DLDP link state
The neighbor number of the port
Neighbor mac address
Neighbor port index
Neighbor state
Neighbor aged time
Description
Global DLDP state (enable or disable)
Interval for sending Advertisement packets (in
seconds)
DLDP mode (enhance or normal)
DLDP authentication mode (none, simple, or md5)
Password for DLDP authentication
Port shutdown mode (auto or manual)
Setting of the DelayDown timer
Number of the DLDP-enabled ports
Index of a DLDP-enabled port
DLDP state on a port (initial, inactive, active,
advertisement, probe, disable, or delaydown)
Port state (up or down)
Number of the neighbors of a port
MAC address of a neighbor
Neighbor port index
Neighbor state (unknown, one way, or two way)
Neighbor aging time
4-2