Display Rmon History - HP E4510-48G Command Reference Manual

If entry-number is not specified, the log information for all event entries is displayed.
If you use the rmon event command to configure the system to log an event when the event is
triggered, the event is recorded into the RMON log. You can use this command to display the details of
the log table: event index, current event state, time the event was logged (the elapsed time in seconds
since system initialization/startup), and event description.
Examples
# Display the RMON log information for event entry 1.
<Sysname> display rmon eventlog 1
LogEntry 1 owned by null is VALID.
Generates eventLog 1.1 at 0day(s) 00h:00m:33s.
Description: The alarm formula defined in prialarmEntry 1,
uprise 80 with alarm value 85. Alarm sample type is absolute.
Generates eventLog 1.2 at 0day(s) 00h:42m:03s.
Description: The alarm formula defined in prialarmEntry 2,
less than(or =) 5 with alarm value 0. Alarm sample type is delta.
Table 12-3 display rmon eventlog command output description
Field
LogEntry
owned by
VALID
Generates eventLog at
Description
The above example shows that event 1 has generated two logs:
eventLog 1.1, generated by private alarm entry 1, which is triggered because the alarm value (85)
exceeds the rising threshold (80). The sampling type is absolute.
eventLog 1.2, generated by private alarm entry 2, which is triggered because the alarm value (0)
is lower than the falling threshold (5). The sampling type is delta.

display rmon history

Syntax
display rmon history [ interface-type interface-number ]
View
Any view
Default Level
1: Monitor level
Event log entry, corresponding to the MIB node logIndex.
Owner of the entry, corresponding to the MIB node eventOwner.
Status of the entry identified by the index (VALID means the entry is
valid, and UNDERCREATION means invalid. You can use the
display rmon command to view the invalid entry; while with the
display current-configuration and display this commands you
cannot view the corresponding rmon commands.), corresponding to
the MIB node eventStatus.
Time when the log was created (Time passed since the device was
booted), corresponding to the MIB node logTime.
Log description, corresponding to the MIB node logDescription.
12-4
Description