Display Icmp Statistics - HP E4510-48G Command Reference Manual

<Sysname> display fib 10.2.1.1
Destination count: 1
Flag:
U:Useable G:Gateway
R:Relay
Destination/Mask Nexthop
10.2.1.1/32
For description about the above output, refer to

display icmp statistics

Syntax
display icmp statistics [ slot slot-number ]
View
Any view
Default Level
1: Monitor level
Parameters
slot slot-number: Displays the ICMP statistics on the specified device. If the device is in an IRF, the
slot-number argument represents the member ID of the device; if the device is not in any IRF, the
slot-number argument represents the device ID.
Description
Use the display icmp statistics command to display ICMP statistics.
Related commands: display ip interface (in IP Addressing Commands of the IP Services Volume),
reset ip statistics.
Examples
# Display ICMP statistics.
<Sysname> display icmp statistics
Input: bad formats
echo
source quench 0
echo reply
timestamp
mask requests 0
time exceeded 0
Output:echo
source quench 0
echo reply
timestamp
mask requests 0
FIB entry count: 1
H:Host B:Blackhole
Flag OutInterface InnerLabel Token
127.0.0.1 UH InLoop0
0
5 destination unreachable 0
10
0
10
5
0
D:Dynamic
Null
Table 10-1.
bad checksum
redirects
parameter problem
information request
mask replies
destination unreachable 0
redirects
parameter problem
information reply
mask replies
10-4
S:Static
Invalid
0
0
0
0
0
0
0
0
0