Nqa Agent Max-Concurrent - HP E4510-48G Command Reference Manual

View
System view
Default Level
2: System level
Parameters
None
Description
Use the nqa agent enable command to enable the NQA client.
Use the undo nqa agent enable command to disable the NQA client and stop all the tests being
performed.
By default, the NQA client is enabled.
Related commands: nqa server enable.
Examples
# Enable the NQA client.
<Sysname> system-view
[Sysname] nqa agent enable

nqa agent max-concurrent

Syntax
nqa agent max-concurrent number
undo nqa agent max-concurrent
View
System view
Default Level
2: System level
Parameters
number: Maximum number of the tests that the NQA client can simultaneously perform, in the range 1
to 5. The default value is 2..
Description
Use the nqa agent max-concurrent command to configure the maximum number of tests that the
NQA client can simultaneously perform.
Use the undo nqa agent max-concurrent command to restore the default.
From the beginning to the end of a test, the NQA test is in the test status; from the end of a test to the
beginning of the next test, the NQA test is in the waiting status.
18-20