Reset Saved-Configuration - HP E4510-48G Command Reference Manual

Current startup saved-configuration file: NULL
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: flash:/startup2.cfg
Slot 2:
Current startup saved-configuration file: NULL
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: flash:/startup2.cfg
Table 5-3 display startup command output description
MainBoard
Current Startup saved-configuration file
Next main startup saved-configuration file
Next backup startup saved-configuration file
Slot 2

reset saved-configuration

Syntax
reset saved-configuration [ backup | main ]
View
User view
Default Level
2: System level
Parameters
backup: Deletes the backup startup configuration file.
main: Deletes the main startup configuration file.
Description
Use the reset saved-configuration command to delete the startup configuration file saved on the
storage medium of the device.
Note that:
This command will permanently delete the configuration file from all the member devices in a
stack. Use it with caution.
On a device that has the main and backup startup configuration files, you can choose to delete
either the main or backup startup configuration file. However, in the case that the main and
backup startup configuration files are the same, if you perform the delete operation for once, the
Field Description
The configuration files used for the current and the
next startup of the master
The configuration file used for the current startup
The main configuration file used for the next
startup
The backup configuration file used for the next
startup
The configuration files used for the current and the
next startup of the slave (with the member ID 2)
5-24