Display Sftp Client Source - HP E4510-48G Command Reference Manual

Description
Use the dir command to display file and folder information under a specified directory.
With the –a and –l keyword not specified, the command displays detailed information of files and
folders under the specified directory in a list form.
With the remote-path not specified, the command displays the file and folder information of the current
working directory.
This command functions as the ls command.
Examples
# Display in a list form detailed file and folder information under the current working directory.
sftp-client> dir
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
drwxrwxrwx 1 noone
drwxrwxrwx 1 noone
-rwxrwxrwx 1 noone

display sftp client source

Syntax
display sftp client source
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display sftp client source command to display the source IP address or source interface
currently set for the SFTP client.
If neither source IP address nor source interface is specified for the SFTP client, the system will prompt
you to specify the source information.
Related commands: sftp client source.
Examples
# Display the source IP address of the SFTP client.
<Sysname> display sftp client source
The source IP address you specified is 192.168.0.1
nogroup 1759 Aug 23 06:52 config.cfg
nogroup 225 Aug 24 08:01 pubkey2
nogroup 283 Aug 24 07:39 pubkey1
nogroup 225 Sep 28 08:28 pub1
nogroup 0 Sep 28 08:24 new1
nogroup 0 Sep 28 08:18 new2
nogroup 225 Sep 28 08:30 pub2
10-19