Reset Dldp Statistics - HP E4510-48G Command Reference Manual

View
System view
Default Level
2: System level
Parameters
enhance: Specifies the enhanced DLDP mode.
normal: Specifies the normal DLDP mode.
Description
Use the dldp work-mode command to set the DLDP mode.
Use the undo dldp work-mode command to restore the default DLDP mode.
By default, a device operates in normal DLDP mode.
Examples
# Configure the device to operate in enhanced DLDP mode.
<Sysname> system-view
[Sysname] dldp work-mode enhance

reset dldp statistics

Syntax
reset dldp statistics [ interface-type interface-number ]
View
User view
Default Level
1: Monitor level
Parameters
interface-type interface-number: Port type and port number.
Description
Use the reset dldp statistics command to clear the statistics on DLDP packets passing through a
port.
If you do not provide the interface-type or interface-number argument, this command clears the
statistics on the DLDP packets passing through all the DLDP-enabled ports.
Examples
# Clear the statistics on the DLDP packets passing through all the DLDP-enabled ports.
<Sysname> reset dldp statistics
4-9